fbpx
treatex hardwax oil, treatex, treatex hardwax oil clear matt, treatex cedar oil, treatex oil, treatex colour tone, cedar oil for wood, treatex hardwax oil ultra, cedar oil, Treatex Eco Colours Ireland,Treatex Colour Tones (Ultra) Ireland,Treatex External Oak Colours Ireland,Treatex Hardwax Oil Ultra Clear Ireland,Treatex Classic Colour Collection Ireland, Treatex Hardener Ireland,Treatex R12 Anti-Slip Ireland,Treatex Thinner Ireland,Treatex BRUSHES Ireland,Treatex Floor Care Ireland,Treatex Spray On Floor and Surface Cleaner Ireland,Treatex Wax Polish Ireland,Treatex Preparation Cleaner Ireland,Treatex WOOD FLOOR CLEANING KIT Ireland,Treatex Wood Rejuvenator Ireland,Treatex Accessories Ireland,Treatex Spray on Floor and Surface Cleaner Refill Ireland,Treatex UV Oil Ireland,Treatex Cedar Oil Ireland,Treatex Bangkirai Oil Ireland,Treatex Grey Cedar Oil Ireland,Treatex Douglas Fir Protection Ireland,Treatex Teak Protection Ireland,Treatex Stain Inhibitor Ireland,Treatex Anti Slip Decking Oil Ireland,Treatex W216 Preservative Ireland,Treatex Hardwax Oil Ultra Natural Ireland,Treatex Laminate Cleaner Ireland,Treatex Hamilton Roller Sleeves Ireland,Treatex Roller Handles Ireland,Treatex Roller Trays Ireland,Treatex WPC Cleaner Ireland,Treatex WPC Protection Ireland

Douglas Fir Protection

Treatex Douglas Fir Protection is a solvent free exterior wood finish which offers long lasting weather protection. It is manufactured on a base of natural sustainable raw materials including linseed oil, sunflower oil and soybean oil

82.54Select options This product has multiple variants. The options may be chosen on the product page

  • Safe for use on children’s toys
  • Not suitable for high tannin content timbers e.g. oak
  • Will not flake or peel
  • Easy to apply
  • UV resistant
  • Highly water resistant
  • Solvent free

Suitable for: internal and external use
Recommended timbers: Douglas fir
Applications: decking, garden furniture and fences

2.5L will cover approximately 20m² in one coat depending on the timber and method of application.

Preparation

Treatex Douglas Fir Protection will only work on unfinished timber. Previous finishes must be fully removed prior to application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. Timbers susceptible to decay, mould and fungi should be treated first with a suitable preservative. We advise that when using Treatex Douglas Fir Protection, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%. Temperature must be greater than 8º𝖼 during application and drying. We strongly recommend a trial application prior to starting the project.

Application

Do not apply in damp, humid conditions. Stir container thoroughly, before and during use. Use a brush to evenly apply Treatex Douglas Fir Protection in the same direction as the wood grain, allowing approximately 125ml per m². Pay particular attention to end grain, on end grain apply wet on wet until product is no longer absorbed by the timber. After approximately 3-6 hours the first coat can be overcoated. The second coat must be applied within 24 hours. Apply with a brush a second coat of Treatex Douglas Fir Protection, again allowing roughly 125ml per m². After the second coat it will take up to 24 hours for the product to fully dry.

  • This product can look milky when first applied however it dries to a transparent brown.
  • Treatex brushes are available. Wet brushes can be cleaned with warm soapy water.
  • Store containers in a cool and frost free environment. Unopened containers will last for three years. Once containers are opened, transfer contents to a smaller airtight container.

Item No. 31400
Sizes: 2.5L (h)

Click To Call: 087 260 0440